Are you looking for a contractor?
Submit our quick form and get quotes now!
When it comes to the different components of a roof, most are familiar with and recognize the importance of fascias, soffits, or flashings, but what about drip edges?
Despite being relatively unheard of, they play an important part in protecting the roof and shingles. Learn everything you need to know about them down below.
What's a drip edge and what's its purpose?
Source: Canva
Basically, a drip edge is a metal flashing (usually L-shaped) that's installed on the edges of a roof. Also known as “drip edge flashing” or “D-metal,” it's used to keep water away from the edge of the eaves and channel it toward the gutter. Otherwise, the roof water would flow between the fascia and gutter and ultimately back up under the shingles.
Besides this function, the roof drip edge also prevents the side effects of strong winds in the event of adverse weather conditions. It goes without saying that during such circumstances, the wind blows the water on the roof in every direction. As a result, rainwater will most likely flow down the roof with greater difficulty.
This is when the drip edge will come into play: As soon as water hits its edge, it'll automatically follow the roof’s slope instead of spreading across the rooftop. However, for the drip edge to fulfill its purpose, its lower flange must be between 2 to 4 inches and placed away from the roof.
Are drip edges mandatory?
Should you look over the edge of your roof, you might not even notice the drip edge. In fact, a lot of houses that aren't newly built are devoid of drip edges. Even if according to most building codes across North America, it's a mandatory component, it isn't always an added feature.
All the while, it's important to note that adding drip edges is strongly recommended by experienced roofers and roofing shingle manufacturers.
Manufacturing Materials
Source: Canva
As we've already mentioned in this article, roof drip edges are most often metal sheets. However, they can also be made of plastic, vinyl, or fibreglass.
However, it's preferable to use plastic drip edges for doors or windows, and metal ones for your roofing due to their substantial durability and resistance. It's also worth noting that one should opt for corrosion-proof or galvanized models.
Specifically, metal drip edges can be made of copper, galvanized steel, or aluminum. To help you make the right decision when it comes to choosing the material, note that it's often preferable to opt for galvanized steel or copper drip edges as the aluminum ones tend to be less resistant than the previously mentioned models, even though they're not as susceptible to rust.
Should you choose a copper drip edge, for it to be wholly effective, it should be at least 0.69 mm thick. On the other hand, if you land on galvanized steel drip edges, opt for a 24 gauge.
The Three Available Drip Edge Profiles
Source: Canva
Moving on to the different profiles available now that we've thoroughly examined the different types of materials used to make drip edges. Three are at your disposal (types C, D & F), see below:
Type C: This is the classic L-shaped model, bent at a 90-degree angle. It has a lower flange at the bottom.
Type D: This model is shaped like a “T” and has a lower flange at the bottom. This type is especially preferred for its capacity to keep water away from the fascia.
Type F: This model differs from the other two due to its longer leading edge. This feature makes it a sensible choice when installing over existing shingles.
Besides the three previously mentioned models, it's still worth noting that there's a fourth type of drip edge: the J-shaped one. However, this one isn't as prevalent when it comes to its use on roofs as it's more adapted for window and door use.
Should you be needing more information regarding your roof renovations, check out the following articles:
Are you looking to get a cost estimate for your roofing project? Try out our cost calculator!
Get 3 renovation quotes for your roofing project
RenoQuotes.com will put you in contact with 3 reliable contractors for your roof renovation project. Fill in the form on our homepage (it only takes a few minutes), and you will receive quotes from trusted professionals.
Dial 1-844 828-1588 to speak with one of our customer service representatives.
Looking for something else?
Related articles
The latest industry news, interviews, technologies, and resources.
Amanda Harvey
•07 Nov 2023
A fence protects the exterior of your home, and when well maintained, can add some serious curb appeal to any property. Since this structure is left outside day and night, it comes up against some severe conditions: snow, rain, sleet, heat, both freezing and melting water. Therefore, it's only natural that the paint on an outdoor fence should easily wear and fade.
Léa Plourde-Archer
•07 Nov 2023
A heat pump is an important purchase for your home and it often helps solve temperature variation issues indoors. Daikin offers options and features that suit all needs and budgets. We will explore this subject in the following paragraphs.
Editorial Team
•07 Nov 2023
A true sanctuary and a rest and relaxation paradise, the bedroom sometimes needs a breath of fresh air to meet new needs and preferences, whether aesthetic or functional. To do this, however, one must be able to determine the ideal bedroom layout and design.
Editorial Team
•07 Nov 2023
If there’s one thing to check prior to purchasing or renting a home, it has to be the humidity levels. Not only are high humidity levels a health hazard, but they can definitely cut down the service life of a structure. Ideally, humidity levels should be between 40 and 50%. Anything above this limit will cause a proliferation of bacteria, mould, and dust mites.
Editorial Team
•07 Nov 2023
By now, we all know what goes on behind the closed doors of the bathroom. Washing, brushing, putting on makeup in the mornings, going through the steps of your bedtime routine in the evenings. There are plenty of products and devices necessary for the rituals of a bathroom.