Submit our quick form and get quotes now!
5 min read
5 min read
FlooringHow to Restore Hardwood Floors in 4 Steps
Hardwood floors are sought-after, and most homeowners want nothing more than a beautiful material coating the base of their home. However, hardwood floor maintenance is a job in itself, and keeping this material looking good requires a little bit of fineness and consideration.
Unlike other types of flooring, each hardwood floor is unique and to cultivate this uniqueness, it must be looked after carefully.
It is important for homeowners with hardwood floors to know how to properly restore this material, as high traffic areas of the home will wear out over time. Restoring your hardwood floors will require a bit of time and energy but once completed, you’ll be happy that you took on this project.
Before starting the restoration process, it is important that hardwood floors are well cleaned. Start by removing any furniture or items that may be obstructing the floors, making sure the surface is bare.
Next, clean the floors using a soft mop and a cleaner that is specifically made for hardwood flooring, as certain cleaners will be too harsh for this flooring material. Following this, wipe the floor down with a terry cloth or static cloth to remove any dirt or debris that may have been left over from the initial cleaning. Depending on the chemicals you’re working with, make sure windows are open so that the room is properly ventilated.
Following a thorough cleaning of your hardwood flooring, it is important to prep the surfaces. You’ll want to sand down the surface before moving on with refinishing, as this will allow you to get rid of imperfections that may have occurred over time. First, using 180 grit sandpaper, hand-sand the perimeter of the room. This will make certain that you reach areas that a buffer or electric sander wouldn’t.
However, do not use a sanding block, as this will make uneven spots in the floor. Your next step is to grab a buffer and buff the rest of that floor! Using the buffer, attach a maroon buffing pad to the buffer to protect the floor. Make sure to wear a dust mask when completing this step, as plenty of dust will find its way into the air.
Working with the buffer, move it from side to side across the floor. You should take note of the direction of the grain, and work towards it. The old hardwood finish will turn to powder as you move the buffer over the floor, so it will be easy to determine which areas have been covered. Make sure that the buffer is constantly moving, stopping every five minutes or so to vacuum the pad.
Next, you should allow all the powdered dust that was kicked up during the buffing process to settle. Give the room 15 minutes and return to it once you feel the room has taken a bit of a breather. Afterwards, put a clean filter into your vacuum and vacuum up the dust. Follow this with a broom, and carefully sweep away any powder that has settled between the hardwood boards. Lastly, use a micro-fibre cloth from before and remove any excess of powder.
You are coming up to the end of this DIY project! Before beginning the finishing job, make sure to cover shoes or feet with booties to avoid damaging either the floor as well as your shoes. Further, wear a respirator that covers your nose and mouth to protect against airborne vapour that may be harmful to your respiratory system.
Now, you can begin the staining process! Strain the hardwood finish and pour it into a small plastic container. Start at the side of the room furthest from the door, and using a small to medium-sized brush, brush a 3-inch wide strip beside the baseboards, trying to cover as much area as quickly as possible.
Unfortunately, stain dries very quickly and therefore, you should move onto the next step after 10 minutes. Using a long hand roller, pour out an approximately 1-inch strip of finish, making sure it is in line with the grain. Again, work quickly to keep edges wet so that stain does not dry unevenly.
After 10 minutes, go back to the initial step, working with a brush at the edges of the room and then rolling out the additional stain from the edges. Repeat these steps until the floor is covered, and let the stain completely dry before recoating. It is recommended that you wait a week to replace the furniture and allow the new stain to soak into the wood.
In order to renovate your hardwood floor, you will need the following tools and materials :
mop ;
cleaning product designed for hardwood floors ;
sponge fabric or antistatic linen ;
180 grit sandpaper ;
electric sander ;
respiratory mask ;
vacuum cleaner ;
broom ;
rag ;
shoe protections ;
stain ;
plastic container ;
small or medium-sized brush ;
small hand paint roller.
The steps to follow | What you need to do |
1) Clean your floor |
|
2) Prepare the surfaces |
|
3) Re-clean |
|
4) The finishing job |
|
Need information on your options for your new hardwood flooring? Check out our article Choosing your Hardwood Floor: the Materials.
RenoQuotes.com can help you get quotes for your hardwood flooring renovation project. If you submit your project to us, we’ll put you in contact with top-rated contractors. Fill in the form on the homepage (it only takes a few minutes), and you will get estimates from trusted professionals.
Last modified 2023-11-07
The latest industry news, interviews, technologies, and resources.
Léa Plourde-Archer • 07 Nov 2023
Thinking of changing your flooring material? Of course, you're already thinking of the budget you will need to set aside for this renovation project.
RenoQuotes.com • 07 Nov 2023
If you haven’t heard of a wet room before, we recommend you start paying attention to this growing trend. The wet room is becoming more desirable as a minimalist, one-of-a-kind feature that works to add value to your home.
Léa Plourde-Archer • 07 Nov 2023
Is your hardwood floor in need of maintenance? Are you thinking about renovating it? RenoQuotes.com is here to explain certain techniques that can be used to sand and varnish the floor in your house.
RenoQuotes.com • 07 Nov 2023
RenoQuotes.com followed home renovation contractor Ali Nazar on the job at the site of a basement renovation project in Montreal. Check out this interview to know more about the subject of basement renovations.
RenoQuotes.com • 07 Nov 2023
If you’re ready to try your hand at landscaping and creating your own garden, then you’re probably feeling pretty excited about picking out plants and flowers. In your search for the most beautiful options for your lawn, you’ve likely come acros the terms “annual” and “perennial”.